常州亿创钣金加工厂专业从事精密钣金加工、激光切割加工为主的钣金加工型厂家

常州亿创钣金加工厂

示例图片三
网站首页 > 行业资讯 > 钣金加工

钣金机箱加工的3种架构

2018-05-07 22:18:45 常州亿创钣金加工厂 阅读

我们平时看到的机柜机箱钣金加工中尤其是不锈钢机箱机柜和钣金机箱机柜中铆钉很多,钣金加工坚固性的零件要求就很高了。紧固件保证机箱机柜的连接牢固性,所以,我们在选够机箱机柜紧固件的时候有一定的要求。

 钣金机箱的3种架构

1.首先应用于高端的技术场合工业铝型材结构框架,

2.其次应用于震动环境的方钢框架系统,

3.最后一种是应用于强大理线及设备安装的铝型材与板金结构框架系统。

材料钢性良好,所有安装紧固件表面镀彩锌,24小时盐雾试验无锈蚀。安装螺丝螺母选用弹性良好不锈钢。脚轮采用单个承重100kg以上内涵滚动轴承,脚钉采用直径Φ18mm以上承重平垫螺钉。 坚固的零部件让钣金机箱机柜更加的安全可靠。

In our usual case, we see a lot of riveting in the cabinet of the cabinet and the cabinet of the sheet metal case, and the requirements for the firmness of the sheet metal processing are very high. The fasteners ensure the connection firmness of the cabinet. Therefore, we have certain requirements when we choose enough cabinet fasteners.

3 structures of the sheet metal box

1. first, applied to high-end industrial technology, industrial aluminum profile structure.

2. secondly, the square steel frame system used in vibration environment.

3. the last one is the aluminum profile and sheet metal frame system which is applied to powerful wiring and equipment installation.

The material is of good steel property. All the fasteners are plated with color zinc, and there is no rust in the salt spray test for 24 hours. Flexible stainless steel is selected for screw and nut installation. The casters use a single bearing 100kg or more for rolling bearings, and the foot pins are more than 18mm in diameter. Solid parts make sheet metal cabinet more safe and reliable.


标签:   钣金加工