常州亿创钣金加工厂专业从事精密钣金加工、激光切割加工为主的钣金加工型厂家

常州亿创钣金加工厂

示例图片三
网站首页 > 行业资讯 > 行业知识

激光切割加工的计价标准方式

2018-05-08 08:30:26 常州亿创钣金加工厂 阅读

对于钢材加工行业来讲其实并没有一个非常标准的计费方式,由于定做的产品材质,厚度,大小都不一致,那么计费的标准也就不一样了,那么怎么衡量激光切割加工这个标准呢?我们一起来了解下吧!

For the steel processing industry in fact, there is not a very standard method of billing, due to the quality of the products, thickness, size are not consistent, then the standard is different, then how to measure the laser cutting processing standard? We come together to solve it!

  激光切割的一般计费标准是根据所加工材料的材质,厚度来决定的,首先要计算加工件的加工线长,例如:一个直径为100mm的圆形,那么它的加工线长就是314.15926mm即0.31415326米,需要注意的是我们一般作图的时候一般就是以毫米为单位,但计算价格的时候我们一般就会按米来计价,公式为:切割长度(单位:米)*单价(单位:元/米)=加工费。

The general charging standard of laser cutting is determined by the material material and thickness of the processed material. First, we must calculate the processing line length of the workpiece, for example, a circle with a diameter of 100mm, then its processing line is 314.15926mm 0.31415326 meters. It needs to be noted that when we generally draw the map it is usually millimeter. As a unit, but when calculating the price, we usually calculate according to the price of rice. The formula is: cutting length (unit: m) * unit price (unit: yuan / M) = processing fee.

  那如果零件外型里还有需要切割的形状情况又有所不同了,计费时不仅要计算切割长度,还要增加一个穿孔费,例如在直径为100mm的圆形里面还要切割4个直径为10mm螺丝孔,那么穿孔就是5次(4个螺丝孔和一个外框穿孔)公式为:<切割长度(单位:米*切割单价(单位:元/米))>+<穿孔次数*元/次(单位:元/次)。注意:切割长度包括外框内所有图形。

If there is a different shape that needs cutting in the outer shape of the part, it is not only to calculate the cutting length, but also to increase a perforation fee. For example, 4 diameters of 10mm screw holes are also cut in the circle of 100mm diameter, then the perforation is the formula of 5 (4 screw holes and one frame perforation): < Cut length (unit: m * cutting unit price (unit: yuan / M)) > + * perforation times * yuan / times (unit: yuan / time). Note: cutting length includes all graphics in the frame.


标签:   钣金加工 激光切割加工 激光切割价格