常州亿创钣金加工厂专业从事精密钣金加工、激光切割加工为主的钣金加工型厂家

常州亿创钣金加工厂

示例图片三
网站首页 > 行业资讯 > 钣金加工

钣金加工件激光切割如何保障精度?

2018-05-08 08:43:02 常州亿创钣金加工厂 阅读

1.材料的厚度和粗糙程度

激光切割最适合切割薄板,效果最好的厚度是12mm以下的碳钢和6mm以下的不锈钢,加工出来的质量明显增强,效率上也出现了保障。如果说切割<1mm材料,切口也会极为光滑的。材料表面粗糙度,材料表面粗糙度也决定着切割质量的好坏,一般越光滑的材料,切割出来的质量也就越好。

2.激光设备的工作功率和模式

经过研究证明了,激光设备的功率越高,即使是切割同样的板材,效果也会比一般的要好。激光切割的模式和材料是有一定的契合度,越高效果越好

3.钣金加工时焦点位置

激光切割机的焦点能对上,切割的精度和准确度才能达到想要的要求。

Thickness and roughness of 1. material

Laser cutting is the most suitable cutting plate, the best thickness is less than 12mm carbon steel and 6mm below the stainless steel, the quality of processing is obviously enhanced, and the efficiency is also guaranteed. If <1mm material is cut, the incision will be very smooth. Material surface roughness and material surface roughness also determine the quality of cutting. Generally, the more smooth material, the better the quality of cutting.

Working power and mode of 2. laser equipment

It has been proved by research that the higher the power of laser equipment is, the better the result will be if it cuts the same plate. Laser cutting mode and material have a certain degree of agreement. The higher the effect, the better.

3. focus position of sheet metal processing

The focus of laser cutting machine can be up to the cutting accuracy and accuracy to achieve the desired requirements.



标签:   钣金加工