常州亿创钣金加工厂专业从事精密钣金加工、激光切割加工为主的钣金加工型厂家

常州亿创钣金加工厂

示例图片三
网站首页 > 行业资讯 > 激光切割

激光切割加工如何保证切割的精度

2018-05-09 15:03:02 常州亿创钣金加工厂 阅读

在金属材料激光切割加工过程中如何保证切割的精度,影响的因素主要分为以下4点:

激光切割加工

1:激光系统上没有活泼切割技巧和切割参数数据库;

激光切割工人只可依托领会和眼睛考察,通过过程手艺体式格式调配激光切割机,不克缺少做到活泼穿孔和活泼切割,切割机消费效力自然十分低。

2:未运用套料软件致使材料应用率低下;

未运用套料软件,而是在激光系统上调用零件或读入零件举办手艺编程,举办有些切割,这样岂但糟践时候,也更华侈材料。所以支配套料软件,既省时,又省料。

3:激光系统不不乱致使的切割迟缓;

因为激光系统的CPU和硬盘发烧,致使系统不不乱,不克缺少全时势变;或是风扇磨损,硬盘惊动或沾染病毒损坏,致使出产障碍,还有大概是激光系统的切割操控软件有缺陷,浮现障碍或切割错误,也会延误切割分娩,沾染切割质料等题目。充裕观念感谢光切割机的精度的因素,就能根据这些做出正确的运用,抑止偏向的发生。

4:运用切割方式不适宜;

在切割树立时,运用的切割格式格式过于简朴,单个零件均要穿孔,且都要齐备切割,没有运用共边、借边、桥接等高效切割格式,致使切割遵从低,并且割嘴耗材(特殊是等离子割嘴)浪掷紧迫。

In the process of laser cutting of metal materials, how to ensure the accuracy of cutting is mainly divided into 4 points.

Laser cutting

1: there is no database of active cutting and cutting parameters on the laser system.

The laser cutting workers can only rely on the understanding and eye inspection, adjust the laser cutting machine through the process handicraft format, and do not lack the lively and lively cutting, and the consumption effect of the cutting machine is very low.

2: the use of nesting software does not lead to low material utilization.

Not using the package software, but in the laser system to invoke parts or read parts to host the handicraft programming, hold some cutting, so that the waste of time, and more extravagant materials. Therefore, controlling the nesting software is time-saving and economical.

3: the laser system is not free from the sluggish cutting;

Because of the CPU and hard disk fever of the laser system, the system is not indiscriminate, but it is lack of all time changes; it is the fan wear, the hard disk drive or the damage of the virus, which causes the production barrier, and the cutting and manipulating software of the laser system is defective, the disappearance or cutting error can also delay the cutting and delivery, and the staining and delivery will be delayed. Cut material and other topics. The concept of abundance, thanks to the accuracy of optical cutting machines, can be used to correct the deviation.

4: the use of cutting method is not suitable;

When the cutting is set, the format of the cutting format is too simple, the single part should be perforated, and all of them must be cut in preparation. The cutting format is not used, such as the common edge, the edge and bridge, so that the cutting compliance is low, and the cutting nozzle consumable (specially the plasma cutting nozzle) is pressed tightly.



标签:   钣金加工 激光切割加工