When it comes to laser cutting, you may think of another word, it's a mechanical cutting, but there's a big difference between cutting and cutting. Then, where is the difference between laser cutting and mechanical cutting? Through the analysis and arrangement of the sheet metal sheet metal processing plant, the main points are as follows: if the gas is blown out, it can react with the cut material in thermal effect, and this can be used as an additional energy. It is important to reduce the heat affected zone and ensure that the focus lens is not polluted.
Difference one: laser cutting process is fast, fast up to 6 - 9m/min, and in terms of production efficiency can be greatly improved.
Difference two: the cut of laser cutting is narrow, the cutting seam can be parallel and vertical to the surface, thus greatly improving the machining precision, but the mechanical cutting can not achieve this effect, so the laser cutting can be used for some very difficult parts with complex or micro type.
Difference three: using laser to cut the surface of the parts, it can be very beautiful, so it can be used as the post process, save processing time, reduce cost, but mechanical cutting is not.
Difference three: workpiece is not easy to deformation, and high accuracy. However, if the mechanical cutting process is slightly deviant, it will easily cause the workpiece to be deformed or even damaged.
In addition, the use of laser cutting can avoid waste in mechanical cutting.
Therefore, through the above analysis, we can know that laser cutting has the advantages of high cutting quality, good applicability and fast cutting speed, but it is not all of the advantages. We still need to pay attention when we are using it.
标签:   钣金加工 激光切割加工