常州亿创钣金加工厂专业从事精密钣金加工、激光切割加工为主的钣金加工型厂家

常州亿创钣金加工厂

示例图片三
网站首页 > 行业资讯 > 钣金加工

钣金加工不同的材料和表面审查的要求

2018-05-25 22:16:35 常州亿创钣金加工厂 阅读

1.钣金加工,加工公差数量较大,所以加工的难度而言,是更大或更小?

对于这个问题,钣金加工工厂在无锡高运行答案是加工尺寸公差等级越高数量,所以加工难度较小,因为数字的水平,平均大小允许的范围,是公差值较大,因此,降低了其难度。

2.不同的材料,其中表中金属加工吗?

这种方式,钣金加工工厂在无锡高运行视图中,是需要把重点放在学习和知识,因为它的高可用性,所以不能马虎对待。

冷轧板︰ 优势在应用中,主要用于简单和成本低,但是,考虑到具体情况。

热轧板︰ 主要用于电镀和油漆,但因难,所以主要基于钣金。

镀锌钢︰ 表面处理通常并不是,其成本并不低。

铝型材︰ 主要是在一些结构更复杂的材料,在子机架中使用。

不锈钢︰ 表面处理通常并不是,它的成本也比较高。

3.表面的金属板材加工审计,它是你需要去看吗?

这一问题,由钣金加工工厂在无锡高运行,和他们的答案,回答如下︰

表面,标准大小的关系视图,清晰的部分和大会之间的装配关系所需的密钥大小。此外,质量、 材料,对这些方面的技术要求也指定,则不能省略。

1. sheet metal processing, machining tolerances are large, so the difficulty of processing is larger or smaller?

For this problem, the high operation of the sheet metal processing factory in Wuxi is that the higher the size of the machining dimension tolerance level, so the processing difficulty is smaller, because the level of the digital, the average size allowable range, the greater tolerance value, thus reducing the difficulty.

2. different materials in which the metal is processed in the table?

This way, the sheet metal processing plant in Wuxi high running view, is required to focus on learning and knowledge, because of its high availability, so it can not be treated carelessly.

Cold rolled sheet: advantages in application, mainly for simple and low cost, but taking into account the specific circumstances.

Hot rolled plate: mainly used for electroplating and painting, but because of difficulty, it is mainly based on sheet metal.

Galvanized steel: surface treatment is usually not, and the cost is not low.

Aluminum profile: mainly used in some of the more complex materials in the sub rack.

Stainless steel: surface treatment is usually not, and the cost is high.

3. surface sheet metal processing audit, is it something you need to see?

The problem is that the sheet metal processing plant runs high in Wuxi, and their answers are as follows:

Surface, standard size relational view, clear part and key size required for assembly relationship between assemblies. In addition, quality, materials, and technical requirements for these areas are specified, and can not be omitted.


标签:   钣金加工