常州亿创钣金加工厂专业从事精密钣金加工、激光切割加工为主的钣金加工型厂家

常州亿创钣金加工厂

示例图片三
网站首页 > 行业资讯 > 钣金加工

钣金加工厂家浅析在车间需要注意什么?

2018-05-30 14:27:21 常州亿创钣金加工厂 阅读

钣金加工阐述钣金属于金属加工,一般车间里面都会有防止加工的机器,比如金属激光切割机。据钣金加工有关人士介绍,在车间里面加工金属工件,一般都需要对金属工件进行切割、折弯、焊接等等的工序,这就要求在这样工序之下,钣金加工的车间有哪些基本的要求呢?
Sheet metal processing describes metal processing in sheet metal, and there are machined machines in general workshops, such as metal laser cutting machines. According to the people of sheet metal processing, it is necessary to cut, bend and weld metal workpiece in the workshop. What are the basic requirements for the workshops of sheet metal processing in this process?

 1.车间空间要宽阔由于车间里面都是堆放一些简述的工件,其外型以及长短都不一;而在加工的过程中,工作人员操作的时候,需要有足够的空间,这也是为了避免在工作过程中造成不必要的碰撞。

 2.隔音效果好一般进行钣金加工都会制造出较大的噪音,因此钣金加工厂一般都建在离开住宅区较远的地方,但为了防止噪音扰民,最好还是要做好相关想隔音处理,也就是车间的建造需要将这个隔音的问题考虑进去。

 3.通风透气在钣金加工过程中,机器以及焊接等工序都会造成热量的散播,而室内的热量聚集太多,而且伴有一些金属加工的味道对钣金加工人员的身体健康也是不利的,所以车间最好保持通风透气。

1. the workshop space should be wide because the workshops are stacked with some sketches, and their exterior and length are different. In the process of processing, the workers need enough space when they operate. This is also to avoid unnecessary collision in the process of work.

2. the sound insulation effect is good in general, sheet metal processing will make a large noise, so the sheet metal processing plant is usually built in the farther away from the residential area, but in order to prevent noise disturbing people, it is better to do a good job in the related sound insulation processing, that is, the construction of the workshop needs to take this sound insulation into consideration.

3. ventilation and ventilation in the process of sheet metal processing, machines and welding processes will cause heat dispersal, and the indoor heat accumulation is too much, and some of the smell of metal processing for sheet metal processing personnel health is also unfavorable, so the best ventilation and ventilation in the workshop.



标签:   钣金加工 钣金加工厂家