The biomass hot stove is an indispensable heat equipment for the living and production of the residents. It is widely used in the industries of heating, bathing, and aquaculture. As a result of clean and environmental protection, biomass fuel has become the first choice for the large energy enterprises. However, the selection of the power of hot hot air stove will affect the initial cost and operating cost. To explain how to choose suitable biomass hot water hot stove.
First, we need to know the conversion formula of the power of hot water stove.
"Big card / hour" is the way of expression in metric units, which indicates the heat output per hour of hot water stove.
"Tons" is a popular version of the steam stove, which indicates that the heat of a hot - water stove is equivalent to the heat absorbed by a certain mass (usually tons) of water from 20 degrees C and vaporized into steam.
"Megawatt (MW)" is the unit of power in the international system of units. The basic unit is W (1MW=1000000W), which should be adopted in formal documents.
The conversion relations between the three expressions are as follows: 600 thousand kcal / h, 1 T / h [1t/h] 0.7MW.
With regard to the heat required for a unit square meter heating, the heating area of 100 calories per square meter building (residence, office, hotel, etc.) is taken according to the current national standard, and the heating area of 1 tons of biomass hot water heater is about 6000.
However, 1 tons of biomass hot hot air stove is generally available for 6000-8000, such as the selection of John energy saving high temperature gasification biomass hot air stove, and the maximum of 1 tonnages can be provided for 10000.
The above is the method of determining the power of the hot blast stove of biomass hot water. When you choose the hot air stove of biomass hot water, please explain the project situation in detail as far as possible so that the supplier can provide you with more suitable biomass hot air stove.
标签:   钣金加工 加工 钣金