常州亿创钣金加工厂专业从事精密钣金加工、激光切割加工为主的钣金加工型厂家

常州亿创钣金加工厂

示例图片三
网站首页 > 行业资讯 > 钣金加工

汽车钣金加工除湿防锈有绝招

2018-06-03 10:14:53 常州亿创钣金加工厂 阅读

汽车钣金加工技术应用较多,但是不用车钣金加工时,可用干燥剂代替空调除湿,最好再买一个简易除湿盒,这样车内部件在隔夜后不易受潮。简单的方法也有,可把旧报纸卷成一捆,放在前后脚垫上或后备厢中,同样也有除湿的效果。

自然阳光下的紫钣金加工外线当然是上佳并且免费的消毒方式。因此,在天气放晴的时候可找一个晒得着阳光的地方,将所有的车门及后备厢盖打开,让车内失足恨电气的湿气排出、通风。然后将车内的脚踏垫、椅套拆下来清洗晾干。

后备厢是大家较容易疏忽的地方,许多人喜欢将一些洗车工具及杂物堆在里边,尤其是放置备胎的地方更容易藏污纳垢,积聚的水汽极易流到凹槽的备胎处。长时间不使用,该部分的钣金及换胎工具就会生锈,最终蔓苏钣金加工延至整个底盘部分。因此,后备厢内最好不要堆放机加工不必要的杂物。

Automobile sheet metal processing technology is more applied, but when no vehicle sheet metal processing is used, desiccant can be used instead of air conditioning dehumidification. It is best to buy a simple dehumidification box, so that the interior parts of the car are not easily dampened overnight. There are also simple ways to wrap old newspapers in bundles, put them on the front and rear footpads or in the trunk, and also have the effect of dehumidification.

In the natural sunlight, the processing line of purple sheet metal is excellent and free of disinfection. Therefore, when the weather is clear, you can find a place where the sun is in the sun, open all the doors and rear compartment lid, so that the car will be disappointed to hate electric moisture and ventilation. Then remove the foot cushion and seat cover in the car and dry it.

The back-up is an easy and negligent place, and many people like to pile up some car washing tools and debris, especially in the place where the spare tire is placed, and the accumulated water vapor is very easy to flow to the spare part of the grooves. For a long time, the part of the sheet metal and the tire changing tools will rust, and the final processing of the sheer sheet metal will be extended to the whole chassis part. Therefore, it is better not to pile up unnecessary materials in the back-up compartment.


标签:   钣金加工 钣金 加工