常州亿创钣金加工厂专业从事精密钣金加工、激光切割加工为主的钣金加工型厂家

常州亿创钣金加工厂

示例图片三
网站首页 > 行业资讯 > 激光切割

激光切割加工设置它的参数来实现加工需求

2018-06-03 10:49:16 常州亿创钣金加工厂 阅读

操作激光切割加工的时候总会碰到大大小小的问题和疑惑,特别是对新手来说,更是如同天书,不知从何下手。

激光切割加工轨迹是根据加工程序用图形的方式直观模拟切割,在这个切割的过程中操应该观察切割的切入方式和加工的次序、加工轨迹,时常检查是否有错误的切割路径。在加工的时候,若是要进行其他的工作,那么你可以设置它的参数来实现加工需求。

要想将数控加工和生产管理系统联系起来,一般可以实现零部件排样之后才能生成一个完整的切割轨迹。不同加工的模式,那么它的激光切割轨迹就有所不同,因此,大家在使用的时候应该注意。

激光切割加工的光束一般为脉冲激光,在加工钣金时,每秒的出光功率都有所不同,所以切割面难免会有细微的不平整,而提高激光器的出光频率可以减少断面的粗糙度,可以吹掉产生的废渣,减少毛刺出现的情况,还能够增加断面的光洁度。

When operating laser cutting, there will always be large and small problems and doubts, especially for novices.

The path of laser cutting is based on the graphics of the processing program. In the process of cutting, it should observe the cutting way and the order of the machining and the machining path, and check the wrong cutting path frequently. When processing, if you want to do other work, then you can set its parameters to achieve processing needs.

If we want to link NC machining and production management system, we can usually achieve a complete cutting trajectory after parts layout. Different processing mode, then its laser cutting trajectory is different, so we should pay attention to when using.

Laser cutting is usually pulsed laser. In the process of sheet metal processing, the power of light output per second is different, so the cutting surface will inevitably have slight roughness, and increasing the laser frequency can reduce the roughness of the section, can blow off the generated waste, reduce the appearance of the burr, and can increase the light of the section. Cleanliness.


标签:   钣金加工 加工 钣金