In order to meet the needs of industrial production, many laser cutting processes are gradually emerging in our eyes. Dongguan laser cutting is a non contact material processing means, so it will not damage the surface of the plate, and the cutting section will not have burr, it is a process that can be greatly reduced after the process. The advantage is that the cost of processing is very low, only the charge of the laser and the air compressor is considered, and the cost of the auxiliary gas is not required. But the cutting efficiency on the thin plate can be compared with the nitrogen cutting. It is an economical and efficient cutting method.
Laser cutting is also evident in the cutting cross section. First, the section of air cutting will produce bottom burr, and the product after laser processing must be processed by two times of burr, which is not conducive to the production cycle of the whole product. Secondly, the section of air cutting is easy to blacken and affects the quality of products. Therefore, laser processing does not need to follow the advantages of subsequent processing can not be reflected, so in the process of galvanized steel plate, many enterprises are reluctant to choose the air cutting mode. So when we choose the processing technology, we need to choose according to the performance of different products, so that we can have good quality products.
标签:   钣金加工 激光切割加工 加工