After several years of rapid development, the sheet metal processing industry has made a number of technological breakthroughs and advances in the machining and manufacturing of machine tools and die processing. Nowadays, the speed of stamping, cutting and other operating procedures of the sheet metal processing machine is far beyond the expectations. The production efficiency of many manufacturing plants is compared with the previous years. The laser head is composed of the light source and the cutting head. The light source produces a short wavelength focused laser beam, and the laser beam is vertically focused on the cutting material surface through the cutting head. Heat, thaw and evaporation are cut materials to form slit, and the closed slit forms the opening of the pad. The software part is used for data receiving, processing, controlling and driving laser head and mobile system.
1, in the process of operation, the spirit should be concentrated.
2, strictly operate according to the operation rules, set the equipment.
3, wear the provisions of the labor insurance articles.
4, easy to deform bending parts, easy to scratch the surface of the workpiece should be orderly discharged packing, not stacking.
5, non-metal parts, before processing, the mold and workbench should be cleaned to avoid contaminating the workpiece.
Notices of sheet metal processing
6, in the process of bending, before taking out the parts in the mold, second parts, blanking and punching holes are not allowed to fall in the parts of the die blade in time. Otherwise, no further blanking is allowed.
7. In the process of operation, the hand is strictly forbidden to be reached between the upper and lower modes. Before the protection measures are taken, it is possible to avoid continuous hair, and it is necessary to use tweezers or other special tools when processing small pieces.
8. After power failure, the slide is free to fall and the punching machine is not allowed to be used when working.
9, the mold is not fastened, the gap is not adjusted well, no machine tool is allowed.
What are the technological breakthroughs and progress of the sheet metal processing industry in machine tool manufacturing? Therefore, the application of laser cutting technology in the extension and development of the application of more and more materials, but different materials have different characteristics, so the material has a great impact on the cutting effect. 1064 after many years of research and verification, the laser company finally summed up various notices for different materials. So the same cutting equipment, cutting effect is also different. Metal composition, microstructure, surface quality, surface treatment, beam reflection, melting point and temperature change are all related to cutting effect.
标签:   钣金加工 激光切割加工 钣金 加工