常州亿创钣金加工厂专业从事精密钣金加工、激光切割加工为主的钣金加工型厂家

常州亿创钣金加工厂

示例图片三
网站首页 > 行业资讯 > 钣金加工

给大家普及钣金加工件的联接方法

2018-06-08 15:53:50 常州亿创钣金加工厂 阅读

给大家普及钣金加工件的联接方法

随着钣金的应用领域越来越广泛,钣金件的设计已经变成了产品开发过程中一个很重要的环节,所以机械工程师就必须熟练掌握钣金件的设计技巧,才能使得设计出来的钣金既满足了产品的功能和外观等要求,又能使得冲压模具制造更加简单、成本更加低。钣金加工件的联接方法:钣金联接主工采用焊接、螺纹联接、铆接合粘接,我公司采用的联接方式:焊接、螺纹联接合铆接。

To popularize the joint method of sheet metal parts

With the wider application field of sheet metal, the design of sheet metal parts has become an important link in the process of product development, so the mechanical engineers must master the design skills of the sheet metal, which can make the sheet metal not only satisfy the requirements of the product's function and appearance, but also make the stamping die. The manufacture is simpler and the cost is lower.The joint method of sheet metal parts: welding, threaded connection and riveting joint bonding, the joint methods adopted by our company: welding, thread connection and riveting.

1.粘接 用粘接剂将所需连接就按粘接子,一起的一种连接方法。

2.螺纹联接 螺纹联接局域安装 容易、拆卸方便、操作简单等优点,常用于可拆的钢结构连接,它可分为螺钉联接合螺栓联接。

3接触焊 接触焊时瞬时加热连接部位子熔化状态或非熔化状态下对被焊件加压形成焊接接头的焊接方法,它可分为对焊、点焊和缝焊。

4.铆接 铆接是用铆钉将金属结构的零件或组合件连接子,一起的方法,铆钉种类较多,我们常用的铆钉有封闭形圆头抽芯铆钉、封闭形沉头抽芯铆钉及开口型圆头抽芯铆钉、开口型沉头抽芯铆钉。

5.焊接--是对焊件进行局部或整体加热或使焊件产生塑性变形,或加热与塑性变形同时进行,实现永久连接的工艺方法,可分为:手工电弧焊、气体保护电弧焊、激光焊、段焊和接触焊,我司主工采用气体保护焊接接触焊。

6气体保护电弧焊--在进行气体保护电弧焊时,电极电弧区及焊接熔池处在保护气体的保护下,采用氩气保护焊缝表面梅雨氧化物及夹杂物。可以在任何空间位置施焊,可以用肉眼观察焊接的成形过程并进行调整生产效率高。

我们相信在未来的发展趋势中,钣金技术会越来越受欢迎的,更有发展的空间。

1. bonding adhesive will connect the required connection to the adhesive.

The 2. threaded connection is easy to install, easy to disassemble and easy to operate. It is commonly used in dismantling steel structure connection, which can be divided into screw connection and bolt connection.

3 the welding process of the welded joint under the transient heating connection position or the non melting state, which can be divided into welding, spot welding and seam welding.

4. riveting riveting is a method of connecting parts or combinations of metal structures with rivets. There are many kinds of rivets. The rivets of our common rivets are closed round head rivets, closed sinking head riveting rivets, open type round head riveting rivets and open type sinking head riveting rivets.

5. welding is a process method for the welding parts to be heated locally or as a whole or to make plastic deformation of the welding parts, or to heat and plastic deformation at the same time, to achieve permanent connection. It can be divided into: manual arc welding, gas shielded arc welding, laser welding, segment welding and contact welding, and the main worker of our company adopts gas protection welding contact welding.

6 gas shielded arc welding - when the arc welding of gas is carried out, the electrode arc area and the welding pool are protected by the protective gas, and argon is used to protect the surface of the weld and the inclusions on the surface of the weld. It can be welded in any space position. It can observe the forming process of the welding with naked eyes and adjust the production efficiency.

We believe that in the future development trend, sheet metal technology will become more and more popular and more room for development.



标签:   钣金加工 加工 钣金