常州亿创钣金加工厂专业从事精密钣金加工、激光切割加工为主的钣金加工型厂家

常州亿创钣金加工厂

示例图片三
网站首页 > 行业资讯 > 钣金加工

进行钣金加工的时候应该注意以下的几点

2018-06-14 11:56:21 常州亿创钣金加工厂 阅读

为了防止尖角处应力集中产生弯裂,可将弯曲线移动一定距离,以离开尺寸突变处。所以,进行钣金加工的时候应该注意以下的几点:

1.加装安全防护装置

在冲压设备和模具上设置安全防护装置或采用劳动强度小、使用方便灵活的手工工具,也是当前条件下实现冲压作业安全的有效措施。

2.使用手用安全工具

使用手用安全工具可以避免因钣金加工的模具设计不合理及设备突发故障所引起的事故。

3.对模具采取防护措施

钣金加工的模具采取防护措施包括在模具周围设置防护板和对模具结构进行改进。

In order to prevent bending stress at sharp corners, bending curves can be moved at a distance from the sudden change of size. Therefore, we should pay attention to the following points when making sheet metal processing.

1. installation of safety protection device

It is also an effective measure to realize the safety of stamping operation under the current conditions that the safety protection device is set up on the stamping equipment and die, and the manual tools with small labor intensity and convenient and flexible use are used.

2. use hand safety tools

The use of hand safety tools can avoid accidents caused by the unreasonable design of the mould and the sudden failure of the equipment.

3. protective measures for die

Protective measures are taken for mould in sheet metal processing, including setting up protective plate around mould and improving die structure.



标签:  不及格 钣金加工 钣金加工厂家 钣金