常州亿创钣金加工厂专业从事精密钣金加工、激光切割加工为主的钣金加工型厂家

常州亿创钣金加工厂

示例图片三
网站首页 > 行业资讯 > 钣金加工

厂家讲述钣金加工操作规程

2018-06-28 22:47:34 常州亿创钣金加工厂 阅读

钣金加工车间的在产品、物料等码放应整齐有序,应留出人员和运输通道;地面不得有黄油,油液和水;码垛应避免超高、超斜,以免出现倒塌危险。物料码放时不得压碾电源线。

2 照明灯如出现破裂要及时告知车间领导进行更换。电源开关、接线盒、保险盒等供电设施出现破损,要暂停使用,告知车间领导进行更换。 

 3地灯、台钻、手砂轮等用电设备的线缆如出现破损,要先修复再使用。  

 4严禁用拽线缆的办法搬运绞磨机、手电钻等手动工具。  

 5工作中如有飞溅粉末、渣滓的现象,要戴防护眼镜和口罩。不得穿凉鞋,拖鞋,高跟鞋或赤脚进入车间 

 6操作砂轮,角磨机时,火化飞溅处应躲开旁人,并严禁指向电气设备、易燃易爆品。

 7搬运金属原材料,成品,收拾下脚料时,要戴手套。  

 8严禁在车间内嬉戏打闹,做危险游戏; 严禁在工作时聊天,发短信;车间内不得吸烟;严禁酒后进入车间工作。 

 9 搬运物料时,要避免伤及电源线缆和高压气管。 

 10 高压气瓶应置于低温、通风处,避免阳光直晒、高温烘烤。气管不能沾油污。  

 11 各种机床的安全操作应执行相应的安全操作制度。  

 12 使用千斤顶、吊链、撬杠等工具时应注意受力点的承重重量,起落工件时应谨慎操作,对可能发生的意外情况应有防护手段和准备,切忌慌乱。  

 13操作台钻、立钻及其他旋转电动工具时严禁戴手套。  

 14安装设备过程中应配戴硬壳安全帽。  

 15下班后关闭所有自己操作的电动工具、设备,切断电源、关好自己附近的窗子及照明。

1 in the sheet metal processing workshop, the products and materials should be placed orderly and orderly. The personnel and transportation channels should be left out. The ground must not have butter, oil and water. The stacking should avoid super high and super oblique, so as to avoid the danger of collapse. It is not allowed to press the power line when the material is placed.

2 if a lighting lamp breaks down, inform the workshop leader in time to replace it. The power supply facilities such as power switch, junction box and safety box are damaged. They should be suspended and inform the workshop leader to replace them.

If the cable of the electrical equipment such as 3 floor lamp, bench drill and hand grinding wheel is damaged, it should be repaired and reused first.

4 strictly prohibit the use of dragging cable handling grinder, hand drill and other hand tools.

5 if there are splashing powder and dregs in work, wear protective glasses and respirators. No sandals, slippers, high heels or barefoot should be allowed to enter the workshop.

6 when operating the grinding wheel and the corner grinder, the others should be avoided from the cremation splash, and no electrical equipment, inflammable and explosive materials shall be strictly prohibited.

7 wear metal gloves when handling raw materials, finished products and packing leftovers.

8 strictly prohibit frolic and play dangerous games in the workshop; strictly prohibit chatting and texting while working; no smoking in the workshop; strictly prohibit the entry into the workshop after drinking.

9 when handling materials, avoid damaging power cables and high pressure pipes.

10 high pressure cylinders should be placed in low temperature and ventilated places to avoid direct sunlight and high temperature baking. The trachea can't be contaminated with oil.

11 the safety operation of all machine tools should be carried out.

12 when using jacks, chain, crowbar and other tools, we should pay attention to the weight bearing weight of the force, and should operate carefully when starting and falling, and should have protective means and preparation for the possible accident, and avoid panic.

13 do not wear gloves when operating bench drill, vertical drill and other rotary electric tools.

14 the hard shell safety helmet should be worn during the installation of the equipment.

15 turn off all your own electric tools and equipment after work, cut off the power supply, close your windows and lighting.



标签:   钣金加工 钣金加工厂家 钣金