常州亿创钣金加工厂专业从事精密钣金加工、激光切割加工为主的钣金加工型厂家

常州亿创钣金加工厂

示例图片三
网站首页 > 行业资讯 > 钣金加工

如何让你的钣金加工更加顺手呢?

2018-06-28 22:54:10 常州亿创钣金加工厂 阅读

通常在工业上锁使用的确定焦点位置的方法有以下几种:首先是打印法,主要是使切割头从上往下运动,在塑料板上进行激光束打印,打印直径最小处为焦点;其次是斜板法,主要是用和垂直轴成一角度斜放的塑料板使其水平拉动出最小处作为焦点;最后是蓝色火花法。

通常我们在长时间用一个机械以后都要对他进行维护,因为这样可以让他用的时间更长一点,但是我们又应该用什么方法来让钣金加工更加的顺手呢?想必这是每个使用钣金加工的朋友都想知道的,所以接下来就看小编给大家带来的介绍吧。

之后我们还要用布来对他进行擦拭,把有松动的零件进行固定。除此之外我们还要对机床设备进行维护,好比说要对比较容易出现锈蚀的地方进行涂防锈油或者是摸粉尘。当我们清理好了以后要对那些裸露在外面的零件进行防锈工作,这是非常重要的。之后我们还要对整个系统进行检查,看看他能不能进行正常的工作。简单来说想要让钣金加工用的更加顺手,那我们就需要做到上述这几个方面。如果你想要知道更加详细的内容,那可以直接和我们进行联系。

对于CO2激光切割加工这项关键技术,主要是集光、电、机器一体化的综合技术。而深圳市涛龙科技有限公司觉得激光束的一些相关参数、机器等都会直接影响到激光切割的效率以及质量们特别对于切割精度比较高或者是厚度比较大的零件,需要掌握以下的几项关键技术。

一、焦点的位置控制技术,对于焦点位置控制技术,主要的有点是能使得光速的能量密度较高,从而产生尽可能窄的裂缝,同时焦点光斑直径还和透镜的焦深成正比。

我们要对钣金加工进行维护,首先就是要对有损坏的电源线进行维护,要是比较严重的那我们就要直接进行更换。还有那些有接触问题的电刷或者是破损两量比较大的都要进行替换。还要用高压的气流来对钣金加工进行清理,把里面的粉尘都清理掉。再看看卡头和钥匙有没有变形,要是有那我们就要换新的。

三、最后是喷嘴设计及气流控制技术。

二、切割穿孔技术,这个主要是热河一种热切割技术所具备的,主要有爆破穿孔以及脉冲穿孔两个类别。

Generally, there are several methods for determining the location of the fixed focus in industrial lock: the first is the printing method, mainly making the cutting head moving from top to bottom, printing the laser beam on the plastic plate, printing the minimum diameter as the focal point; secondly, the oblique plate method, mainly using a plastic plate with a vertical axis in an angle. Pull out the smallest place as the focus; finally, the blue spark method.

Usually we have to maintain a machine for a long time, because it can make him use a little longer, but what method should we use to make the sheet metal processing more handy? Presumably this is what every friend who uses sheet metal processing wants to know. So let's look at the introduction of Xiaobian.

After that, we have to wipe it with cloth and fix the loose parts. In addition, we need to maintain machine tools, such as rust proof oil or dust. When we clean up, it is very important to rust out the bare parts. Then we will check the whole system to see if he can do the normal work. In short, to make sheet metal processing more smoothly, we need to do the above aspects. If you want to know more details, you can contact us directly.

The key technology of CO2 laser cutting is the integrated technology of integrating light, electricity and machinery. And Shenzhen Tao long Technology Co., Ltd. thinks that some of the related parameters and machines of the laser beam will directly affect the efficiency of laser cutting and the quality of the parts with high cutting precision or larger thickness, so we need to master the following key technologies.

First, the focus position control technology, for the focus position control technology, the main point is that the energy density of the speed of light is high, thus producing as narrow as possible cracks, and the focal spot diameter is also proportional to the Jiao Shencheng of the lens.

We want to maintain the sheet metal processing. First of all, we need to maintain the damaged power line. If it is serious, we need to replace it directly.  And those with contact problems or two larger breakage should be replaced. It is also necessary to clean the sheet metal with high pressure airflow and clean up the dust inside. Let's take a look at the deformation of the card and the key. If there is, we need to replace it.

Three, finally, nozzle design and airflow control technology.

Two, cutting piercing technology, this is mainly a kind of hot river cutting technology, there are mainly two types of blasting perforation and pulse piercing.



标签:   钣金加工 钣金加工厂家 钣金