常州亿创钣金加工厂专业从事精密钣金加工、激光切割加工为主的钣金加工型厂家

常州亿创钣金加工厂

示例图片三
网站首页 > 行业资讯 > 钣金加工

钣金加工厂选购判断【机箱机柜】材质的技巧

2018-06-28 23:04:23 常州亿创钣金加工厂 阅读

选购判断【机箱机柜】材质的窍门之一

机箱机柜钣金加工提醒你如何在选购机箱机柜材质的简单的窍门还可以用手指弹弹机箱机柜的外壳。

如果听到的是比较沉闷厚重的声音,说明该机箱机柜的选料不错,强度高、耐冲击、硬度大、弹性强。

很多机柜没有足够的空间来容纳竖直线缆管理器。为充分利用机箱机柜空间,机箱机柜还可以灵活地配置垂直配线系统,在机箱机柜侧面可以安装4个1RU铜缆或者光缆配线架,可以节省机箱机柜空间,减少跳线的弯曲和更方便地插拔跳线。

机箱机柜使用技术和环境要求:机箱机柜设接地点,以确保机箱机柜有效接地。

机箱机柜偶尔我们还是需要搬动一下的, 这就要求我们要选择结实点的机箱机柜产品。机箱机柜上下左右留有走线孔,机箱机柜底部有大走线盖板可调节。机箱机柜组装迅速,并完全可迅速拆卸。

那么如何确定机箱机柜的框架是否结实耐用呢?

一般来说,机箱机柜通常选用1毫米以上的钢板制作构成,钢板的厚度及材质直接关系到机箱机柜的刚性以及隔音和抗电磁波辐射的能力。优质机箱机柜所用钢板厚度都不低于1.3mm,相同体积下越重的机箱机柜越好。

要想有出色的线缆管理系统,必须可以保证机箱机柜内部有足够的气流空间。机箱机柜底部可提供最多达65%面积区域用于地板下方线缆的走线。机柜顶部装有13块大小不等的挡板可以方便拆卸,可以提供40%的区域面积供上走线系统进线。

线缆的完美布局才能使机箱机柜更出色

机箱机柜制作工艺在不断更新,材质上,工艺上,设备上都有新的突破。机箱机柜产品细分逐渐增多,常用的有电子机箱机柜、电力机柜、服务器机箱机柜等等,各种机柜的使用技术和环境要求也不尽相同。

不锈钢机箱,各种仪器外壳,铝型材外壳、钣金机壳、机柜、控制台

One of the tips for judging the material of cabinet [cabinet]

The cabinet cabinet metal sheet processing reminds you how to choose the simple tips for choosing the cabinet material, and you can use your fingers to play the shell of the cabinet.

If you hear a rather heavy and heavy voice, it shows that the cabinet has good material selection, high strength, impact resistance, high hardness and strong elasticity.

Many cabinets do not have enough space to accommodate vertical cable managers. In order to make full use of the cabinet space, the cabinet can also be flexible to configure the vertical wiring system. 4 1RU copper cables or cable lines can be installed on the side of the cabinet, which can save the cabinet space, reduce the bending of the jumper line and more conveniently insert the jump line.

Chassis cabinet technology and environmental requirements: chassis cabinet location, to ensure that the chassis cabinet effective grounding.

Occasionally, we still need to move the chassis cabinet, which requires us to choose the box cabinet products with strong points. There are line holes on the upper and lower sides of the cabinet. There is a large line at the bottom of the cabinet, which can be adjusted. The chassis cabinet is assembled quickly and can be quickly dismantled.

So how to determine whether the frame of chassis is durable and durable?

Generally speaking, the cabinet is usually made up of more than 1 millimeter steel plates. The thickness and material of the steel plate are directly related to the rigidity of the cabinet and the ability to sound insulation and electromagnetic radiation. The thickness of the steel plate used in the high quality cabinet is not less than 1.3mm, the heavier the chassis cabinet is under the same volume, the better.

If you want to have an excellent cable management system, you must ensure that there is enough air space inside the cabinet. The chassis at the bottom of the chassis can provide up to 65% of the area for the cable underneath the floor.  The top of the cabinet is equipped with 13 baffles of different sizes, which can be easily disassembled and provide 40% of the area for the upper line system.

The perfect layout of cable can make cabinet cabinet even better.

Chassis cabinet production process is constantly updated, material, technology, equipment, there are new breakthroughs. The subdivision of the chassis of the chassis is gradually increasing. There are often used electronic cabinet cabinet, electric cabinet, server chassis cabinet and so on. All kinds of cabinet use technology and environmental requirements are not the same.

Stainless steel chassis, all kinds of instrument shell, aluminum profile shell, sheet metal case, cabinet, console.



标签:   钣金加工 钣金加工厂家