常州亿创钣金加工厂专业从事精密钣金加工、激光切割加工为主的钣金加工型厂家

常州亿创钣金加工厂

示例图片三
网站首页 > 行业资讯 > 钣金加工

什么是不锈钢的冷加工?包含哪些工艺?

2018-07-04 16:03:22 常州亿创钣金加工厂 阅读

虽然被称为冷加工,但其实就是在常温下进行的不锈钢加工,这种工况之下材料也能发生变化,从而得到所需的产品。不锈钢的冷加工工艺中包含的方式还是比较多的,而且各有各的特色,将逐一向大家介绍。

不锈钢加工的冷加工中,有一种辊轧成型工艺,这主要是针对板材和异性线材的生产而设计的成型技术,不管是简单的还是复杂的,辊轧成型都能获得优异的产品。不锈钢的冲压成型也是冷加工中的一种,需要采用冲床和模具才能时产品成型,一般在大批量生产的时候才会用到这种技术。

要说经济性的话还是冷弯成型比较好,特别是在生产小批量通用部件的时候。除了以上这三种冷加工工艺之外,还有一种橡胶衬垫成型,它的最大特点是可以大幅度降低模具加工成本,但在生产复杂形状产品的时候受到了限制。

Although it is called cold processing, it is actually made of stainless steel at normal temperature. In this case, the material can also change to get the desired product. Stainless steel cold processing technology contains many ways, and each has its own characteristics, will be introduced to you one by one.

In the cold processing of stainless steel, there is a roll forming process. This is mainly a molding technology designed for the production of plate and heterosexual wire. Both simple and complex, roll forming can obtain excellent products. The stamping molding of stainless steel is also a kind of cold processing. It is necessary to use punch and die to form the product. It is used in mass production.

To be economical, it is better to do cold roll forming, especially when producing small batch parts. In addition to these three cold processing technologies, there is a rubber liner forming, which is characterized by a large reduction in the processing cost of the mold, but is limited in the production of complex shape products.



标签:   钣金加工 钣金加工厂家 钣金